For use with existing mortice latch or lock. The existing lock must have 22mm fixing hole below the follower (spindle).
The CL400 coded plates are supplied with a random code commencing with the ‘C’ clear button. To change the code after fitting, the lock must first be removed from the door. The code is non sequential, that is the code can be entered in any order e.g. 1234 can be 4321 or 1342 or whatever is the most convenient sequence. With the 13 buttons a total of 8,191 different codes are available, any of which may be entered in any order.
IMPORTANT: When using CL400 front and back plates only, please test with your selected lock-case to ensure that the latch retracts fully from the code side without too much resistance. Some lock-cases have a heavily sprung latch follower designed for use with un-sprung lever furniture. This heavy springing can defeat the clutch on our locks. If in doubt do not specify one of our locks with a lock-case that is designed for use with un-sprung lever furniture.
Please note the code chamber for mechanical locks requires the lever to be rotated at least 45 degrees to re-set the lock for the next code user.
Please contact Codelocks technical department if you are unsure. Codelocks Limited does not accept responsibility for products incorrectly specified.
* CL400/405 does not require a separate installation template. Please use the neoprene seal that comes with the product. Download instructions opposite for full installation guide.
Brand: CodelocksBody Material: Zinc AlloyCodes: 8,191 non sequential codes availableCode free option: CL405Code change method: Requires removal of lock from doorCode in / code out: NoCode storage: Single codeDoor thickness: 35mm - 60mm (1 3/8" - 2 3/8")Non handed: Lock will fit doors hung on the left or rightSpindle type: 2 part 8mm (5/16") spring loaded spindleSuitable for: Internal and external useType: Front & backplates only
(Details shown apply to the default selection)
Spares parts are available to order online. From fixing bolts to replacement latches, we've got it covered.
Access the product card here
Be the first to Write a Review for this item!
0 Items - $0.00 | View Basket
+61 2 9882 1009
Copyright © 2017. All Rights Reserved.
Home > Mechanical Locks > CL400