Front and back plates for use with existing mortice latch or lock. The existing lock must have either a fixing hole (22mm) below follower (spindle) or two horizontal holes either side of the follower (38mm centres).
Code Free access option on the keypad
In Code Free mode the outside lever will retract the latchbolt without using a code. This option is ideal for day to day use when punching in a code is not necessary e.g. external doors in a school with high traffic.
Supplied with a random code commencing with the ‘C’ clear button. To change the code after fitting, the lock must first be removed from the door.
The code is non sequential, that is the code can be entered in any order e.g. 1234 can be 4321 or 1342 or whatever is the most convenient sequence. With the 10 buttons a total of 1,023 different codes are available, any of which may be entered in any order.
IMPORTANT: Before ordering a Codelocks Front/Back plate set for use on an existing lock case, the current lock case must be tested to ensure it is compatible. Click here for instruction.
* CL500/505 does not require a separate installation template. Please use the neoprene seal that comes with the product. Download instructions opposite for full installation guide.
Brand: CodelocksBody Material: Zinc AlloyCodes: 8,191 non sequential codes availableCode free option: CL505Code change method: Requires removal of lock from doorCode in / code out: YesCode storage: Single codeDoor thickness: 35mm - 60mm (1 3/8" - 2 3/8")Non handed: Lock will fit doors hung on the left or rightSpindle type: 2 part 8mm (5/16") spring loaded spindleSuitable for: Internal and external useType: Front & backplates only
(Details shown apply to the default selection)
Spare parts are available to order online. From fixing bolts to replacement latches, we've got it covered.
Access the product card here
Be the first to Write a Review for this item!
0 Items - $0.00 | View Basket
+61 2 9882 1009
Copyright © 2018. All Rights Reserved.
Home > Mechanical Locks > CL500